Transmitter is a transmitting device which works with the *receiver devices to transmit the video source, such as notebook computer, Laptops, mobile phone and other equipment, to the -receiver for display.

Receiver include -Mirroring software which built-in Meeting Flipper Boards and also series of -receiver boxes. Hereby we mainly introduce the basic use of Transmitters.

1. USB Transmitter Pairing Connect the transmitter to the USB port of box to automatically pair.

2. USB Transmitter upgrading

When the host device is connected to the Internet, the box will automatically updated according to the server update. If USB Transmitter pop up the message to upgrade, Please click to upgrade. And then, you need insert the USB button into the USB port of box for upgrading and pairing to synchronize the version. Please don’t plug the USB Transmitter during upgrading.

After upgrading 100%,the interface will show upgrade success, and then pair with the device. After pairing, you can connect to Laptop for casting.

3. How to check the USB Transmitter version

As shown in below photo, click the setting in the lower left corner of the USB Transmitter ,open” ABOUT” to check the current version

ClickShare Wireless Presentation System QS36 Datasheet:

Installation	No Installation, No Configuration
Connector	USB Device
System	Support Windows 7/8/10,Apple Mac
Resolution	720P~1080P
Frame	Max support 1080P 60frames
Delay	90~180ms
Display Mode	Support Extended screen
Touch back	Support10point touch-back(Windows 7/8/10)
	Support mouse mode back(Windows,Mac)
Connections Number	1~8((If more than 8devices, you should an additional router)
Show screens	1~9
Transmitting frequency	Transmitter 300Mbps
Wireless transmission protocol	IEEE 802.11 a/g/n/ac
Frequency	5.8G
Encryption	AES
Protocol	WPA2-PSK

MUst combine with our Receiver Box ,like below:

Inquiry Cart 0